Anti radiation wallpaper ECO P100

Processing

Processing:

• The underground needs to be clean, dry and free of water removable layers.
• Absorbent surfaces must be prepared with our primer GK5.
• Overlapping or against each other.

Option 1: Application method with metallized side showing into the room
The technically best solution, although the result is not as visually appealing. But afterwards, all sheets can easily be connected with grounding tape GSX and can then be grounded. Furthermore, the best solution with a wallpaper primer – you can then remove the wallpaper without having metallized residues on the wall.

Option 2: Application method with the white wallpaper side showing into the room
Visually the nicer solution, but the grounding tape can no longer be applied afterwards. If you prefer doing so, you need to apply the grounding tape GSX on the underground.
After gluing, the metal-side should be contacted, we highly recommend tests with different glues.

Glues:
For heavy wallpapers. Successfully tested  from Henkel Methylan: Spezial (Special), Vlies (Fleece), Raufaser (Ingrain wallpaper).

Edge on edge or overlapping:
To achieve the best shielding result, you should ideally glue the individual strips with an overlapping. The overlapping can be smoothed out extensively with a fine putty, then sanded. Alternatively, you could also glue edge on edge – as it’s usually done with wallpapers – you’ll have to accept minimal shielding losses for higher frequencies.

Attention:
Due to the thick metal layer, the wallpaper has sharp edges after cutting. Work with caution and wear protective gloves!

Grouding:
This product with an electrically conductive surface can be electrically grounded.